Gear and Pulley Pack.
Use as normal, bevel and worm gears. Use with rack gears and as a
chainwheel. Push fit onto 5mm shaft. Number of teeth and pulley size
marked on for identification.
Standard Pack Code 1541-101C $10.95
Contains: 25 gears and 30 pulleys: 5 each of 10, 20, 30, 40 and 50
tooth gears plus 10 pulleys 10mm diameter and 5 each of 30, 50 60
and 70mm diameter.
Bulk Pack Code 1541-102C $49.95
Contains: 5 standard Packs
Product
Code/Contents
Link Strip Pack.
Can be cut, bent and made into curved structures. As cheap as wood
strip and an alternative material. Ideal for making levers and linkages.
Standard Pack Code 1541-103C $10.95
Contains: 30 link strips (300mm long), 10 short link strips (150mm
long), 10 connector strips, 10 angle strips, 10 60o and
10 right angle gusset plates.
Bulk Pack Code 1541-104C $49.95
Contains: 5 standard Packs
Product
Code/Contents
Special Mechanisms Pack.
Contains: winch drum, dual purpose worm gear and power screw, rack
gera, multi-purpose flange plate and a screw box (used with power
screw).
Bearing and Adaptor Pin Pack.
Adaptor pins provide a quick, easy to use fastener. They're also used
to mount gears, pulleys, etc. onto motors. The bearings eliminate
problems experienced in making mechanisms run freely.
Standard Pack Code 1541-105C $10.95
Contains: 10 bearing brackets and 10 bearing blocks, 70 long adaptor
pins (used to fit mechanisms to dc motors) and 30 short adaptor pins
(used to fit mechanisms to stepper motors).
Bulk Pack Code 1541-106C $49.95
Contains: 5 standard Packs
"I can't beleive it - the link strip is as cheap as wood strip." Sarah Donnellan, Junior Teacher, Galway.
"Inventa is so cheap that children can now take their models home, and
that's great." Mike Fox, Head Teacher, Walsall.
"We won't go back to lolly sticks." John Parker, Northamptonshire.
Product
Code/Contents
Adaptor Pack.
5 different types. Used to make scaffold like structures, or
integrate round and square materials. Can also be used to make
mechanisms with dowel.
Standard Pack Code 1541-109C $9.95
Contains: 10 slider plates, 20 end adaptors, 30 straight adaptors,
10 side, 10 cross and 10 parallel adaptors.
Bulk Pack Code 1541-110C £44.95
Contains: 5 standard Packs
Product
Code/Contents
2. Plastic Shaft.
5mm diameter, 50mm long. Cheaper alternative to wood dowel.
Standard Pack Code 1541-115C
$14.95
Contains: 100 lengths.
Bulk Pack Code 1541-116C $69.95
Contains: 5 standard Packs
Product
Code/Contents
3. Wood Dowel.
5mm diameter, 600mm long.
Standard Pack Code 1541-113C
$12.95
Contains: 50 lengths.
Bulk Pack Code 1541-114C $59.75
Contains: 5 standard Packs
Product
Code/Contents
4. Collar and Spacing Material.
Fits onto 5mm dowel: 500mm long. Cut to size to make collars and spacers.
Standard Pack Code 1541-121C
$9.95
Contains: 25 lengths.
Bulk Pack Code 1541-122C $44.95
Contains: 5 standard Packs
Product
Code/Contents
5. Flexible Drive and Coupling Material.
Fits onto 5mm dowel: 500mm long. Used to overcome problems of shaft
misalignment.
Standard Pack Code 1541-119C
$9.95
Contains: 25 lengths.
Bulk Pack Code 1541-120C $44.95
Contains: 5 standard Packs
Product
Code/Contents
Screw, Nut and Washer Pack.
Standard Pack Code 1541-147C
$11.95
Contains: 100 M4 nuts, 100 washers and 100 20mm long screws.
Product
Code/Contents
6. Chain.
Works with gears to make a chain drive.
Standard Pack Code 1541-146C
$5.95
Contains: 200mm plastic chain.
Product
Code/Contents
7. Pulley Belt.
Inexpensive elastic belt. Cut to any length and tie ends together
to make belt.
Standard Pack Code 1541-138C
$2.95
Contains: 10 metres.
Product
Code/Contents
6. Wood Wheels.
Standard Pack Code 1541-123C
$15.95
Contains: 100, 40mm diameter wheels.
Standard Pack Code 1541-124C $23.95
Contains: 100, 70mm diameter wheels.