|
Feedback Form
| General Tools | Clamping/ Holding | Cutting/ Making Holes |
| Clamping and Holding Tools | |
| 1. Valiant Worktop | Code: #1101 35.00 |
| Benefits . . . . clamps to desk or table top 35 x 35 x 10 cm work area ready-ruled marking out area allows clamping of materials protects the surface underneath |
|
| 2. Clamp and Clamping Screw Packs | Pack of 10 clamps Code: #1106
18.00 Pack of 10 clamping screws Code: #1107 19.00 |
| Used to clamp work to the Valiant Worktop. Particularly good for making wood strip frames. Helps raise the quality of pupils work and introduces good practice and safety techniques. Both packs needed. | |
| 3. Valiant Vice | Code: #1105 49.00 |
| Made from hardened steel and heavy duty plastic mouldings
this vice clamps or bolts directly to the work table or W.L.T. work
bench trolley. Ledges in the jaws hold rods, Inventa wood and plastic
stripping during cutting. Straight or mitre cut guides and a range
of drill jig options help the novice saw and drill user complete a
successful operation. It may require desk clamp set or work top screw
pack for temporary fixing to work area.
|
|
| Vice Desktop Clamp Pack (2 clamps) | Code: #1146 8.50 |
| Clamps the Vice onto a desk or table.
|
|
| Vice/Worktop Screws (2) | Code: #1145 6.00 |
| These either screw the Vice to the Valiant Worktop, or
hold desk clamps to underside of worktop.
|
|
| Worktop Desk Clamps (2) | Code: #1108 8.99 |
| Used to fit Valiant worktop (#1101) to desk. (requires
#1145)
|
|
| 4. Small G Clamps | Code: #600 3.20 |
| Lightweight G Clamps with a 29mm throat, ideal for using
with wood strip or clamping materials together while marking out or
glueing.
|
|
| 5. Large G Clamp | Code: #601 4.00 |
| This 24mm opening with 55mm throat is ideal for Inventa
wood and link strip.
|
|
| 6. Sash Cramp | Code: #602 7.95 |
| For professional results when making wood frames this
cramp is a miniature of the full size Joiner's version. Full opening
size is 240mm.
|
|
| Pliers 5-6" Combination | Code: #253 10.00 |
| A general purpose blunt nosed pliers handy for gripping.
|
|
| Pliers 5" Bentnosed | Code: #256 10.00 |
| Spring tensioned rubber handles for grip.
|
|
| Spring Clamps | |
| Plated metal set of two each with plastic sleeved handles.
Probably the most useful clamps for modellers. Quick and convenient
to use when hot gluing wood and plastic frames. 100mm Code: #962 6.50 150mm Code: #963 9.95 |
|
| Tweezers | Code: #468 3.00 |
| Set of two, stainless steel, fine tipped. Suitable for jewellery making, electronic component selection and placement of some science related objects. | |
| Back to product index |
|---|