Cutting Tools |
2. Craft Knife |
Code: #850 2.50 |
Large, safety lock & snap blades.
|
Craft Knife Blades |
Code: #953 4.50 |
Pack of 10.
|
9. Compass Cutter |
Code: #720 21.50 |
Used when cutting circles, washers, arcs, curves and
rings in light weight card and thin plastic sheeting.
|
9. Cutting Mats |
|
These are made from top quality 3mm thick, green, laminated
memory material. Both sides are usable. New cutting lines are not
influenced by previous cuts. Safe non slip surface. One side has
grid lines to assist the cut operation.
A4 - 212mm x 300mm Code: #702 9.99
A3 - 450mm x 300mm Code: #706 22.00
A2 - 600mm x 450mm Code: #711 45.99
|
3. Rotary Safety Cutter |
Code: #703A 25.00 |
This handy slider cutter can be used with paper and
light card. The rotary self sharpening blade is exposed only when
cutting. Comes with 100 x 38cm cutting mat. Great for junior users
and also fabric cutting.
|
Slider Cutter |
Code: #703 29.99 |
This tool also comes with cutting mat, ten spare blades,
non slip pad and aluminium edged ruler. Extra blades as in the craft
knife type can be fitted. The blade engages with the medium as the
cut stroke takes place. Can cut up to cereal box weight card with
no difficulty.
|
5. Junior Hacksaw |
Code: #900A 6.50 |
With a plastic in line handle and wire frame this saw
is suited to the junior student's hands.
|
6. Junior Hacksaw with Blade Release |
Code: #900 10.50 |
Has metal frame, blade release and tension
adjustment. This saw can be used with wood, plastics and metal.
The shaped in line handle helps to develop good tool practice skills.
|
7. Replacement Hacksaw Blades |
Code: #954 8.50 |
Work safe! Use sharp blades. 10 pack metal, plastic
or wood cutting.
|
10. Flat File |
Code: #958 7.99 |
150mm. Used for modelling when fine shaping of wood
and plastic components is required.
|
11. Round File |
Code: #953 7.99 |
4.8mm. Used with Inventa to finely adjust hole sizes
and to form slots in metal, plastic or wood.
|
Pliers set of 5, 5" |
Code: #251 29.00 |
Assorted long, combination, cutter and bent nosed modelling
or hobby with spring tension rubber handles.
|
Pliers 5-6" Combination |
Code: #253 10.00 |
General purpose blunt nosed pliers useful for griping
or cutting. Supplied with insulated handles.
|
Pliers 5" Diagonal |
Code: #252 10.99 |
Good quality side cutters used for cutting finer wires
plastics and cane. Handy for use with Tronix wire.
|
Pliers 5" End Nipper |
Code: #255 10.00 |
With spring tensioned. Suitable for cane and wire work.
|
Pliers 5" Long Nosed |
Code: #254 10.99 |
Comes with spring tensioned rubber hand grips.
|
Sand Paper Block |
Code: #920 4.00 |
Washable dual grit. Ideal for shaping most materials.
100mm x 25mm x 70mm.
|
Scissors Child's Safety |
Code: #712 1.65 |
Plastic frame with 50mm metal blade.
|
Scissors Student |
Code: #719 6.50 |
210mm long with 90mm stainless steel blade and plastic,
molded handles. Easily cuts up to cereal box weight card.
|
Shears Wolf Junior Anvil |
Code: #800 29.99 |
16mm cut. Ideal for shaping Inventa components. Cuts
plastic, synthetic tube or wood without crushing the work. Suitable
for both right or left handed users. Students find these shears
save time accurately cutting wood stripping, dowel plastic rod,
rigid and flexible nylon tubing and most non metal materials.
|
Shears Wolf Senior Anvil |
Code: #801 39.99 |
Similar to above but with replaceable blade and anvil.
|
Wire Cutter Stripper |
Code: #960 11.95 |
Very useful for electricity projects, electronics or
when using TRONIX. Good for cutting and stripping. Simply place
wire in the jaws, if necessary adjust cutter grip then squeeze handles. |
Tools for
Making Holes |
Drill Cordless |
Code: #810 89.00 |
Battery powered drills are certainly time savers. We
have selected Black and Decker as the best all round unit for primary
through to junior high school students. Includes charger, two reachargeable
batteries, keyless chuck, variable speed, reverse direction switch
and torque control.
|
1. Enclosed Gears Hand Drill |
Code: #950 49.95 |
With safety in mind this U.K. drill is light weight
and easy for students to grip. Drilling pressure is in line which
the student finds easier when drilling the smaller holes. Better
gear ratio allows easy turning and good drill position control.
|
Drill Bits |
|
Suitable for wood, plastic or metal.
Code: #909 - 3mm, Code: #908
- 4mm, each 2.50
Code: #902 - 5mm, Code: #901
- 5.5mm each 3.00
Code: #910 - 6mm each 3.50
|
Drill Bit Set |
Code: #257 15.00 |
Set of 13 metric sized pieces in plastic snap shut container.
|
4. Reamer Drill |
Code: #904 7.99 |
5.2 - 5.5mm. Used for making running fit axle holes
when using Inventa.
|
6. Paper Drill |
Code: #128 17.79 |
Used to "drill" 6mm holes in paper, card or plastic
sheet. Can be used with thick materials; holes can be positioned
anywhere.
|
Punch - Impact |
|
Used to punch holes in any position on larger projects.
Ok for heavy card, Coroflute or light plywood.
6mm Code: #959 7.99
4mm Code: #959A 7.99
|
Punch - Anvil Type |
Code: #951 9.99 |
Used with thick paper, card, plastic and leather. Six
assorted holes up to 4.5mm dia. Useful to make fitting holes in
base materials and to make wheels out of milk bottle tops. Can also
be used to cut small holes through flexible tube.
|
5. Punch Pliers (MAUN U.K.) |
Code: #127A 18.50 |
This punch cuts a very clean 6mm hole in most thin materials
including paper, card, plastic, nylon and fabric. |