Drivers for Valiant Products

Below is the driver for the Roamer USB Lead. It is used to connect the new Roamer (Roamer-Too) to a Windows PC.

Driver Installer Description Compatibility

Roamer USB Lead

Also known as:
Computer Interface

Date: 18 Feb 2015
Version: 1.0.0.3

Download

Allows the Roamer USB Lead (also known as the Computer Interface) to work with RoamerWorld software

Install this if you have a Roamer USB Lead or you want a PC to recognise a Roamer USB Lead at a future time.

This download installs the driver only.

To Install

Install must be carried out by an administrator or with elevated privileges.

  1. Ensure the Roamer USB Lead is not connected to the Roamer or the PC.
  2. If present, cancel any "Found New Hardware" dialogs.
  3. Run the installer.
  4. After the installer finishes, connect the Roamer USB Lead to the PC only.
  5. Windows will detect that the Roamer USB Lead has been connected and may lead you through a series of prompts. During these prompts:
    • a. Do not allow Windows to check online for a driver, if asked.
    • b. Do allow Windows to automatically install the correct driver, if asked.

32-bit Windows,
64-bit Windows:
Windows XP, Windows Vista, Windows 7, Windows 8, Windows 10

The same installer is used for 32-bit and 64-bit Windows.